ユーザーマニュアル Siemens ネットワークカード 54 [45/56 ページ]

Siemens ネットワークカード 54

Appendix

Gigaset USB Adapter 54 / englisch / A31008-M1071-R101-1-7619 / appendix.fm / 04.12.2006

The connection is

not set up at all or

not properly

If you cannot set up a connection between your PC with the

Gigaset USB Adapter 54 and another wireless network adapter,

this may be due to a number of causes:

The PC you want to connect to has not been powered up.

ì Power up the PC.

You are working in an ad-hoc network and a different radio

channel is being used.

ì Select the correct radio channel.

The wrong mode has been set (infrastructure or ad-hoc mode).

ì Select the correct mode.

The SSIDs of the devices that are to communicate with each

other are different.

ì Make sure that the same SSID is used for all connection

partners with network adapters for wireless operation.

Different encryption is being used.

ì Select the same encryption on all devices.

Changes in the configuration are not applied by your PC

ì Restart your PC.

The IP address or the subnet mask is wrongly configured.

ì Make sure that the IP address and the subnet mask are

correctly configured in the IP Settings tab.

As a rule, it is necessary to assign static IP addresses when

operating a network in ad-hoc mode.

It takes a long time

to set up a

connection

Depending on the environment and the devices, setting up a

connection may take a while.

ì In Site Monitor, click on Scan or double-click on the

network in question.

Problem Causes and remedies