3. I/O PARAMETERS
3.2 I/O Device Parameters
II - 18
# Item Contents Setup range (unit)
9113 EIA OUTPUT In data output mode, select the ISO or EIA code for
data output.
In data input mode, the ISO and EIA codes are
identified automatically.
0: ISO code output
1: EIA code output
9114 FEED CHR. Specify the length of the tape feed to be output at
the start and end of the data during tape output.
0 to 999 (characters)
9115 PARITY V Specify whether to check the parity of the No. of
characters in block during data input.
The No. of characters is factory-set so that the
check is valid at all times.
0: Do not perform
parity V check
1: Perform parity V
check
9116 TIME-OUT Set the time out time to detect an interruption in
communication.
Time out check will not be executed when set to 0 to
30 seconds.
0 to 30 (s)
9117 DR OFF Specify whether to check the DR data at the data
input/output.
0: DR valid
1: DR invalid
9118 DATA ASC II 0: Output in ISO/EIA code (Depends on whether
#9113, #9213, #9313, #9413, or #9513 EIA
output parameter is set up)
1: Output in ASC II code
0/1
9119 INPUT FORM Specify the mode for input (collation).
0: Standard input (Data from the very first EOB is
handled as significant information.)
1: EOBs following the first EOB of the input data are
skipped until data other than EOB is input.
0/1
9121
9122
9123
9124
9125
9126
9127
9128
EIA CODE [
]
#
∗
=
:
$
!
When output with EIA code‚ data can be output
using the alternate code in which the special ISO
code not included in EIA is specified.
Specify the codes which do not duplicate the
existing EIA codes by hexadecimal for respective
special codes.
0 to FF (hexadecimal)
9201 ∼
Set the same settings for device 1.
9301 ∼
Set the same settings for device 2.
9401 ∼
Set the same settings for device 3.
9501 ∼
Set the same settings for device 4.
England 
Deutschland 
France 
Italia 
Polska 
United Kingdom 
Россия 
Nederland 
España 
Magyarország 
Sverige 
România 
Portugal 
Colombia 
Suomi 
New Zealand 
Česká republika 
Türkiye 
Danmark 
日本