5-281
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter 5 CLI Commands
dspaal2profile
dspaal2profile
To display data about a specified AAL2 profile type and profile number, use the dspaal2profile
command in the AAL2 trunking operating mode.
dspaal2profile profile-type profile-num
Syntax Description
Command Modes AAL2 trunking
Usage Guidelines The AAL2 profiles correspond to the profile types ITU and ATMF as defined in the ITU-T I.366.2 and
ATM forum AF-VTOA-0113 standards respectively.
Examples The following example shows that the data for AAL2 profile type 1 and profile number 1 is displayed:
dspaal2profile 1 1
UUI Packet Packet Seq. No.
Codepoint Length Time Interval
Range (octets) Codec SID M (ms) (ms)
0-15 40 PCMU No SID 1 5 5
0-15 40 PCMA No SID 1 5 5
Related Commands There are no related commands.
profile-type The profile type to be used for the CID. It can be one of the following values:
• 1 = International Telecommunication Union (ITU) I.366.2
• 3 = Custom
profile-num Number of the profile. It can be one of the following values:
• 1 = ITU profile type
• 2 = ITU profile type
• 3 = ITU profile type
• 7 = ITU profile type
• 8 = ITU profile type
• 12 = ITU profile type
• 100 = custom profile types
• 101 = custom profile types
• 110 = custom profile types
• 200 = custom profile types